Expert service · Carbon Border Adjustment Mechanism · CBAM
Your EU importer asks for CBAM emissions data.
For producers outside the EU, our team prepares each plant's emissions report to the Commission's CBAM calculation rules. For EU importers, we prepare the data for the annual CBAM declaration, first due by 30 September 2027.
- Commission's CBAM calculation rules
- Verifier independent of EuFSI
- Based in Enschede, the Netherlands
| Embedded emissions | t CO₂e per tonne |
|---|---|
| Direct emissions | 1.92 |
| Precursors | 0.36 |
| Total | 2.28 |
Across the border
A plant's verified figures serve every EU buyer
A producer outside the EU has no CBAM duty in law. Without a verified report, its EU buyer must use default values.
Outside the EU, one plant answers the importer's request with an emissions report checked by an accredited CBAM verifier. Another plant has no verified report. On the EU side, the CBAM declaration shows steel as actual and cement as default. The default value carries a mark-up in 2026 that rises in 2027 and again from 2028. The same report also serves another EU buyer.
Default values
The mark-up on default values rises each year
The Commission expects verified actual emissions to be lower than default values with their mark-up in most cases.
Fertilisers carry 1% and electricity carries none.
What you receive
Producers get reports and importers get data sets
Two cards, one per reader. The producer's card lists the installation boundary and the monitoring plan. It also lists the emissions report and summary, one per installation and year. The last row is each EU buyer's template, filled in if the quote names it. The importer's card lists a scope check and declarant status documents if needed. It also lists a request for each plant with filling-in notes. The last rows are the declaration data set, each figure marked actual or default, and a certificate estimate.
For producers outside the EU
- Installation boundary
- Monitoring plan
- Emissions report and summaryOne per installation and year
- Each EU buyer's template filled inIf the quote names it
Commission's CBAM calculation rules
For EU importers
- Scope check
- Declarant status documents if needed
- A request for each plant with filling-in notes
- Certificate estimate
CBAM Regulation
Scope and duty
An authorised declarant files each CBAM declaration
Three cards. Goods lists the six kinds of CBAM goods. Quantity shows two importers on one 50 tonne mark. One stays at or under 50 tonnes a year and is exempt. Another passes 50 tonnes, and all its imports that year count. Origin shows the EU border.
Goods
- Iron and steel
- Aluminium
- Cement
- Fertilisers
- Hydrogen
- Electricity
Listed by CN code in Annex I to the CBAM Regulation.
Quantity
The first four goods are combined per importer.
Origin
Any origin outside the EU counts, except those in Annex III.
Only an authorised declarant may import more than 50 tonnes a year, or any hydrogen or electricity.
Data we ask for once
Your plant and customs teams hold the records
We ask for this once. Our team reuses it if you order other outputs.
Producer
One data request
- Energy and fuelSite manager
- Supplier repliesPurchasing
- Sites and productionSite manager
- Precursor purchasesPurchasing
- Quality recordsQuality manager
Importer
One data request
- Import lines by CN codeCustoms
- EORI numberCustoms, finance
- Supplier and plant namesPurchasing
Only the EuFSI team works on your files. They are used only for the work you order.
How it runs
Five steps from the call to the declaration
-
Call
You and our team
Your goods, plants and the request you received
-
Written quote
Our team
The plants or import lines it covers
-
Data request
Our team, then you
ProducerFrom your plant records and your suppliers' replies
ImporterImport lines, then your request to each plant
-
Report or data set
Our team
ProducerMonitoring plan, then the report after your year of monitoring
ImporterThe declaration data set and certificate estimate
-
Check and declaration
Independent checkerYou
ProducerAn accredited CBAM verifier independent of EuFSI checks the report
ImporterThe declarant files the declaration and surrenders the certificates
The timeline depends on complete plant records, your suppliers' replies and the checker's calendar.
Two dates. From 1 February 2027 certificates are on sale to declarants. The first declaration is due by 30 September 2027.
Questions
Do we receive a CBAM certificate?
No. Only an authorised declarant buys and surrenders CBAM certificates, each covering one tonne of embedded emissions.
As a producer, you receive your emissions report, prepared to the Commission's CBAM calculation rules. A verifier independent of EuFSI checks it. The verifier is accredited for CBAM by an EU national accreditation body.
The verifier visits the plant for the first verification. Our team gives the verifier the calculations and answers its questions until the check is complete. Default values need no check.
What if a plant sends no verified figures?
The declarant must then use the Commission's default value for the plant's goods and country. Default values carry a mark-up of 10% in 2026, 20% in 2027 and 30% from 2028. Fertilisers carry 1% and electricity carries none.
Unverified figures cannot be declared. If you are the producer, a precursor without a verification report takes its default value.
Actual emissions can come only from the plant that made the goods. If you buy from a trader, your request reaches the plant through the trader.
Which goods are CBAM goods, and which emissions count?
Annex I to the CBAM Regulation lists the CBAM goods by CN code. CN stands for Combined Nomenclature, the EU tariff code. If Annex I gives a shorter code, every CN code under it is covered, except those Annex I excludes.
Goods imported from 1 January 2026 are covered, whenever they were made. Imports from every country outside the EU are covered, except those in Annex III such as Norway and Switzerland. For the first four goods, an importer at or under 50 tonnes a year is exempt. Our team checks each of your CN codes against Annex I at the start.
Embedded emissions are the greenhouse gases released in making the goods. They are counted in tonnes of CO2 equivalent per tonne of goods, or per megawatt-hour for electricity. CBAM goods used to make them are called precursors, and their emissions are included.
For steel and aluminium only direct emissions count. For cement and fertilisers the electricity used in production also counts.
Can our customs broker file the declaration?
Yes, if it acts as your indirect customs representative, declaring in its own name. The broker then files as the authorised declarant, a status it must obtain itself. It may refuse that role for an EU importer.
With a direct representative, you stay the declarant. The declaration states the quantities imported, the embedded emissions and the certificates to surrender. If actual emissions are used, it includes the verifier's reports.
Our team prepares the data for the declarant to file.
Can we send figures from an LCA instead?
No. CBAM figures follow the Commission's CBAM calculation rules, which build on monitoring under the EU Emissions Trading System. Emission factors from life cycle assessment databases are not accepted.
The same plant records can serve both, in separate calculations.
How long is an emissions report valid?
It covers one reporting period at one installation. A new report and a new verification are needed each year.
The monitoring plan is the plant's written method for measuring fuels, materials and output. It must be reviewed at least once each reporting period.
Our team can prepare the monitoring plan and each year's report.
A quote starts from the request you received
Tell us what you import and from where, or what your EU buyer asked for.
LCADPPEPDGHGCSRD · VSMECBAM