Expert service · Life cycle assessment · LCA

Your product team asks for a full life cycle assessment.

A full LCA reports several environmental impacts of your product, each by life-cycle stage. Our team prepares it to ISO 14044, the international standard for an LCA and its report.

  • Prepared to ISO 14044
  • A reviewer or verifier independent of EuFSI, if needed
  • Based in Enschede, the Netherlands
LCAReport

Life cycle assessment report

Example

A life cycle assessment report with four impact rows and a row for other categories, each split by life-cycle stage.

  • Climate change 12.4 kg CO₂e
  • Water use 0.86 m³
  • Resource use, fossils 148 MJ
  • Acidification 0.052 mol H⁺ eq
  • Other categories

ISO 14040 · ISO 14044

Study and check

What the results are for decides the study

Our team gives each checker the calculations and answers its questions until the check is complete.

UseStudyWho checks it
A choice between materials or designs Screening LCANot an ISO 14044 report None required
A tender that asks for an Environmental Product Declaration or an entry in the Dutch Nationale Milieudatabase Full LCAthen the EPD or NMD entry A verifier the EPD programme accepts, or an LCA-toetser the NMD recognises
Figures for a specific claim about your product Full LCA An independent expert, if you choose
A published comparison with a competing product Full LCA with critical review A critical review panel, before publication

What you receive

ISO 14044 sets the parts of the report

The PDF report names the database of average figures and the impact method, each with its version.

Scenarios that compare materials, designs or suppliers can be added.

Results in ExcelExample

General

Who ordered and who prepared the study, the date, and a statement that it follows ISO 14044.

Goal

What the study is for, who will read it, and whether a published comparison is planned.

Scope

The functional unit, the stages covered and the impact categories. The functional unit is the measured function of the product that the figures refer to.

  1. Raw materials
  2. Manufacturing
  3. Distribution
  4. Use
  5. End of life

Inventory

The inputs behind the figures, such as materials and energy, with their sources.

Impact results

Example

Each impact category by life-cycle stage, with the conversion factors used.

  • Climate change Raw materials 45%, Manufacturing 25%, Distribution 10%, Use 12%, End of life 8%
  • Water use Raw materials 55%, Manufacturing 20%, Distribution 5%, Use 15%, End of life 5%
  • Resource use, fossils Raw materials 40%, Manufacturing 30%, Distribution 15%, Use 10%, End of life 5%
  • Acidification Raw materials 50%, Manufacturing 20%, Distribution 18%, Use 7%, End of life 5%

Interpretation

The processes and suppliers with the largest share, and how far results move when an assumption changes. It also states the study's limits.

Critical review statement

The reviewers, their report and the replies to their comments, if a review was made.

What each part contains

Data we ask for once

Your teams hold most of the records

We ask for this once. Our team reuses it if you order other outputs.

We also ask for packaging, recycled-content certificates and quantities produced in the same 12 months as the energy. Use data is asked for where the boundary includes it.

EuFSI

One data request

  • Bill of materialsProduct development
  • Energy and fuelFinance, site manager
  • Supplier repliesPurchasing
  • Sites and productionProduction manager
  • Transport legs, inbound and outboundLogistics
  • Recycled content and end-of-life routeProduct development, recyclers
  • Water use and waste per siteSite manager

Only the EuFSI team works on your files. They are used only for the work you order.

How it runs

Five steps from the call to the report

  1. Call

    You and our team

    The request and what the results are for

  2. Written quote

    Our team

    The study, the products and the boundary

  3. Data request

    Our team, then you

    From your records and your suppliers' replies

  4. Model

    Our team

    Each stage, from the data request and a published database

  5. Report, and any check

    Our teamIndependent checker

    A reviewer or verifier independent of EuFSI, if needed

The timeline depends on complete material and energy records, your suppliers' replies and the checker's calendar if a check applies.

Your sites can be inside or outside the EU.

Questions

Do we receive a certificate?

No. You receive a report prepared to ISO 14044. If a check is made, the checker issues a review or verification statement. Our team gives the checker the calculations and answers its questions until the check is complete.

Can we use the results in claims to consumers?

EU consumer law bans generic environmental claims to consumers, such as “eco-friendly”, unless the trader can show recognised excellent environmental performance. It also bans claims that a product's climate effect is neutral, reduced or positive because of offsetting. An LCA gives you the figures behind a specific claim about your own product.

Can the LCA become an EPD later?

Yes, if a programme operator has product category rules for your product group. Our team builds the EPD from the same LCA, under those rules. An independent verifier checks the EPD before the operator publishes it.

The operator's rules set the stages declared, the database version and the conversion factors. If they differ from the LCA's choices, our team recalculates those parts of the model.

What if a figure is missing, or a supplier does not reply?

If a measured figure is missing, our team uses an average from a published database. The report marks it as an estimate. A supplier's reply that arrives before the report is final can replace the estimate. The report also states how a shared meter's energy is divided between products.

How long is an LCA valid?

ISO 14044 sets no validity period. The report states the period its data cover. Your customer's rules may set their own update date. We update the LCA when the product, the supply chain or the data change.

An EPD built on the LCA is normally valid for five years. The end date is printed in the EPD.

Does the law require us to have one?

No general EU law requires a manufacturer to hold an LCA. A customer or a tender usually asks for one.

A quote starts from the request you received

Tell us what the results are for, and whether they will be published.

LCADPPEPDGHGCSRD · VSMECBAM